Venture Drilling Supply Construction & Drill Rig Equipment Sales Texas & Oklahoma | Doosan Wheel Loaders, Excavators & Parts OK & TX | Midland & Georgetown


Drilling Equipment
Construction & Ground Engineering
Drilling Accessories
Used Equipment
Product Videos
Service
Atlas Copco Exclusive Site
Doosan Exclusive Site

 




Drilling Tools

DTH Accessories

Secoroc DTH Hammers

Atlas Copco Secoroc offers the market’s most comprehensive range of DTH hammers. There are hammer solutions for water well drillers, miners and quarry drillers as well as for contractors in construction, oil and gas. We even offer environmentally friendly water-lubricated hammers and the reverse circulating RC hammers aimed at Green Field exploration.
Secoroc DTH hammers are available in holes sizes from 3,5 to 48 inches in diameter and up to 72 inches with the Secoroc Cluster drills.

Features & Benefits:

  • Improves your productivity and capability
  • Comprehensive range of DTH hammers and drill bits to match all conceivable applications
  • Cutting edge technology that has been tested and proven through years of field use

DTH Bits

Secoroc Down The Hole bits

Atlas Copco Secoroc has a comprehensive range of DTH drill bits that have been designed to match all conceivable applications. Each bit, made from quality tungsten carbide steel, is precision machined to produce a perfect body. They are then heat-treated to the right hardness, facilitating excellent surface compression and fatigue resistance. Manufactured in-house, each bit is finally fitted with the required shape and sized buttons. We offer five basic bit designs: Convex, Flat front, SpeedBit, Concave, and Rocket Bit. These are designed for all types of rock, whether hard or soft, abrasive or fractured.

Top Hammer Drilling Tools

Coprod

Bits
Head
Section
Tube Drivers

COPROD - bits

Secoroc COPROD is Atlas Copco's patented system for fast, straight drilling in demanding rock - a system that combines the high penetration rates of tophammer drilling with the hole straightness and the hole quality of DTH drilling. In short - combining the best of two worlds.

COPROD - head

Secoroc COPROD is Atlas Copco's patented system for fast, straight drilling in demanding rock - a system that combines the high penetration rates of tophammer drilling with the hole straightness and the hole quality of DTH drilling. In short - combining the best of two worlds.

COPROD - section

Secoroc COPROD is Atlas Copco's patented system for fast, straight drilling in demanding rock - a system that combines the high penetration rates of tophammer drilling with the hole straightness and the hole quality of DTH drilling. In short - combining the best of two worlds.

COPROD - tube drivers

Secoroc COPROD is Atlas Copco's patented system for fast, straight drilling in demanding rock - a system that combines the high penetration rates of tophammer drilling with the hole straightness and the hole quality of DTH drilling. In short - combining the best of two worlds.



Casing Advancement Systems

Accessories for Casing Advancement Systems

Accessories for Casing advancement systems

A range of accessories are available for the Odex, Symmetrix and Elemex systems, such as lifting tools, wrenches and welding fixtures.

Elemex Permanent Ring Bit System

Elemex Permanent Ring bit system for DTH

Atlas Copco Elemex offers a permanent ring bit system for DTH drilling. With the new Elemex overburden drilling and casing system, Atlas Copco gives you all the benefits of DTH drilling—high productivity, straight and deep holes—without risking air leakage or over-drilling, which can cause damage to surrounding structures. Thanks to Elemex’s design, the flow and direction of the compressed air is under control. This means that you can take on the most sensitive and challenging projects in foundation construction. The three main components of the Elemex system are A pilot bit that drills the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe, which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit. There are two different assemblies offered by Atlas Copco for the system components. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit.

Elemex Retrievable Ring Bit System

Elemex Retrievable Ring bit system for DTH

Atlas Copco Elemex offers a retrievable ring bit system for DTH drilling. With the new Elemex overburden drilling and casing system, Atlas Copco gives you all the benefits of DTH drilling—high productivity, straight and deep holes—without risking air leakage or over-drilling, which can cause damage to surrounding structures. Thanks to Elemex's unique design, the flow and direction of the compressed air is under control. This means that you can take on the most sensitive and challenging projects in foundation construction. The three main components of the Elemex system are A pilot bit that drills the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe, which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit. There are two different assemblies offered by Atlas Copco for the system components. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit.

Odex Under-Reaming Systems
for DTH

Odex Under-reaming systems for DTH

Under reaming systems are most economical solutions for casing drilling in normal ground conditions. Odex systems has become the standard among drilling contractors for casing in water wells, geothermal wells and for shallow micropiling work. Odex is ideal for shor holes in homogenous overburden. Thanks to the ingenious reaming wing, the bit is retrievable and can be used again. Currently Odex is available in seven diameters from 3" to 8" DTH hammers. Odex has a simple structure, good quality and the system is easy to operate.


Odex Under-Reaming Systems
for Tophammer

Odex Under-reaming systems for Tophammer

Under reaming systems are most economical solutions for casing drilling in normal ground conditions. Odex systems has become the standard among drilling contractors for casing in water wells, geothermal wells and for shallow micropiling work. Odex is ideal for shor holes in homogenous overburden. Thanks to the ingenious reaming wing, the bit is retrievable and can be used again. They have become very popular with tophammer drillers and are available in three different sizes from 38 mmm to 51 mm threads. Odex has a simple structure, good quality and the system is easy to operate.


Symmetrix Permanent Ring Bit System for DTH

Symmetrix Permanent Ring bit system for DTH

Atlas Copco offers a Permanent Ring bit system for DTH drilling - Symmetrix, an all-round overburden drilling system for holes of any depth or size. The Symmetrix system is a patented system comprised of an ingeniously simple concentric method of drilling through overburden with casing. Symmetrix can drill straight holes at any angle (including horizontal) and to depths beyond 100 meters. The three main components of the system are made up of: A pilot bit that drills away the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit For these components two different setups are offered by Atlas Copco. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit. Symmetrix systems can be used in a multitude of applications such as micropiling, underpinning, anchoring, marine work and horizontal drilling etc., handling casings from 76 to 1,220 mm (3 to 48 in), to almost any depth.


Symmetrix Permanent Ring Bit System for Tophammer

Symmetrix Permanent Ring bit system for Tophammer

Atlas Copco Symmetrix offers a permanent ring bit system for tophammer drilling, providing an all-round overburden drilling system for holes of any depth or size. The Symmetrix system is a patented, ingeniously simple system using a concentric method of drilling through overburden with casing. Symmetrix can drill straight holes at any angle (including horizontal) and to depths beyond 100 meters (328 feet). The three main components of the system are A pilot bit that drills the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe, which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit. For these components two different setups are offered by Atlas Copco. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit. Symmetrix systems can be used in a multitude of applications such as micropiling, underpinning, anchoring, marine work and horizontal drilling. Symmetrix handles casings from 76 to 1,220 mm (3 to 48 in) to almost any depth.


Symmetrix Retrievable Ring Bit System for DTH

Symmetrix Retrievable Ring bit system for DTH

Atlas Copco Symmetrix offers a retrievable ring bit system for DTH drilling, an all-round overburden drilling system for holes of any depth or size. The Symmetrix system is a patented, ingeniously simple system using a concentric method of drilling through overburden with casing. Symmetrix can drill straight holes at any angle (including horizontal) and to depths beyond 100 meters (328 feet). The three main components of the system are A pilot bit, which drills the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe, which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit. For these components two different setups are offered by Atlas Copco. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit. Symmetrix systems can be used in a multitude of applications such as micropiling, underpinning, anchoring, marine work and horizontal drilling. Symmetrix handles casings from 76 to 1,220 mm (3 to 48 in), to almost any depth.


Symmetrix Retrievable Ring Bit System for Tophammer

Symmetrix Retrievable Ring bit system for Tophammer

Atlas Copco Symmetrix offers a retrievable ring bit system for tophammer drilling, an all-round overburden drilling system for holes of any depth or size. The Symmetrix system is a patented, ingeniously simple system using a concentric method of drilling through overburden with casing. Symmetrix can drill straight holes at any angle (including horizontal) and to depths beyond 100 meters (328 feet). The three main components of the system are A pilot bit, which drills the center part of the hole and guides the drill string.A casing shoe welded to the casing pipe, which is pulled down by the impact of the hammer and pilot bit.A symmetrical ring bit. For these components two different setups are offered by Atlas Copco. For setup one all three above mentioned components should be ordered. Setup two consits of a factory assembled ring bit set (integrated ring bit and casing shoe) and a pilot bit. Symmetrix systems can be used in a multitude of applications such as micropiling, underpinning, anchoring, marine work and horizontal drilling. Symmetrix handles casings from 76 to 1,220 mm (3 to 48 in) to almost any depth.


Reverse Circulation Drilling Tools

Reverse Circulation

Reverse circulation hammers

The key criteria our customers wanted from our reverse circulation drills were simplicity, performance and reliability. Our engineers responded by incorporating the Quantum Leap air cycle into the RC hammer, creating a high frequency hammer with world class performance and reliability.

Features & Benefits:

  • Best performance in all rock formations
  • Long-term, low-maintenance endurance
  • Specifically designed for exploration drilling and in-pit grade control applications


Geotechnical Core Drilling Tools

Tools

Casing Shoes Core Barrels
Core Drilling Bits
Drill Rods
Non Coring Bits

Reaming Shells
Rod Shoes

Special Bit Tools

Geotechnical Drilling and Engineering

Atlas Copco Geotechnical Drilling and Exploration manufactures and markets equipment needed for surface and underground exploration drilling applications. This includes a full range of drilling rigs and drilling tools.


Please explore our complete range of products, all designed to help you achieve the highest possible productivity with the lowest possible maintenance costs. Besides our world class products - our success is due to our commitment to the industry, our interaction with customers and our commitment to sustainable productivity.









Policies | Privacy | Terms & Conditions | Disclaimer | Site Map